Recycling cars and metal is a great idea! Non-ferrous metals include aluminum, copper, lead and nickel. The best part is that metals can be recycled as many times as you want without degrading their properties.
Millions of cars are manufactured every year by the world’s car factories. In the end, they should end up at a car recycling facility. Auto recycling in Victoria BC consists of several stages, which we will now describe.

Step 1


Is this as difficult as it appears? Yes, it’s even more difficult than that.
The trick here is to make sure that the bits you’re dismantling are still in good shape. To disassemble your automobile, you’ll need sockets, wrenches, pliers, and other tools.

Step 2


Cash 4 Junkers Victoria BC

The scrap metal shredder is quite expensive and the inspector checks it daily for damage. This device wears out very quickly due to the increased load. The two-ton drum captures the raw material coming off the conveyor and places it into the shredder. Its huge hammer slams into cars and other salvageable equipment, smashing them into pieces the size of a fist. An industrial vacuum cleaner picks up pieces of rubber and glass mixed with shredded steel.

Step 3


Cash 4 Junkers Victoria BC

Pieces of steel stick to the magnetized drum, and everything else falls down onto the conveyor belt. Here, sorters remove waste material caught on pieces of steel and the cleaned ground steel is ready for delivery to consumers such as steel smelters.
The material that does not stick to the magnetized drum goes for further processing. Shredded waste contains valuable non-ferrous metals such as copper and bronze. The raw material enters the drum screen, where the rotating drum separates the material by size. Waste is just trash, but before sending it to the landfill, the inspector checks it to make sure that valuable material has not been mixed in with it.

The raw material from the screen is evenly distributed along the conveyor and goes to a device called an eddy current separator. Inside it, a rotating magnetic drum creates a strong magnetic field that pushes the non-ferrous metals up through the barrier and into the hopper.
The material that did not pass through the barrier passes through the separator again in case there are valuable non-ferrous metals left. The conveyor sends unnecessary waste to the landfill. Another conveyor is loaded with non-ferrous metals from a separator for sale. He will go to another enterprise, where the raw materials will be divided according to the type of metal. Basically, here metals are divided into copper, bronze and aluminum.